智能船舶集成设计技术

针对符合CCS《智能船舶规范》入级符号的船舶设计开发,研究分析智能船舶集成设计技术的设计思想、设计要素、设计框架和关键技术,设计目标船解决方案,并讨论了未来需要突破技术方向。     

Travel time estimation from sparse floating car data with consistent path inference: A fixed point approach

Estimation of urban network link travel times from sparse floating car data (FCD) usually needs pre-processing, mainly map-matching and path inference for finding the most likely vehicle paths that are consistent with reported locations. Path inference requires a priori assumptions about link travel times; using unrealistic initial link travel times can bias the travel time estimation and subsequent identification of shortest paths. Thus, the combination of path inference and travel time estimation is a joint problem. This paper investigates the sensitivity of estimated travel times, and proposes a fixed point formulation of the simultaneous path inference and travel time estimation problem. The methodology is applied in a case study to estimate travel times from taxi FCD in Stockholm, Sweden. The results show that standard fixed point iterations converge quickly to a solution where input and output travel times are consistent. The solution is robust under different initial travel times assumptions and data sizes. Validation against actual path travel time measurements from the Google API and an instrumented vehicle deployed for this purpose shows that the fixed point algorithm improves shortest path finding. The results highlight the importance of the joint solution of the path inference and travel time estimation problem, in particular for accurate path finding and route optimization.     

A generic data assimilation framework for vehicle trajectory reconstruction on signalized urban arterials using particle filters

With trajectory data, a complete microscopic and macroscopic picture of traffic flow operations can be obtained. However, trajectory data are difficult to observe over large spatiotemporal regions—particularly in urban contexts—due to practical, technical and financial constraints. The next best thing is to estimate plausible trajectories from whatever data are available. This paper presents a generic data assimilation framework to reconstruct such plausible trajectories on signalized urban arterials using microscopic traffic flow models and data from loops (individual vehicle passages and thus vehicle counts); traffic control data; and (sparse) travel time measurements from whatever source available. The key problem we address is that loops suffer from miss- and over-counts, which result in unbounded errors in vehicle accumulations, rendering trajectory reconstruction highly problematic. Our framework solves this problem in two ways. First, we correct the systematic error in vehicle accumulation by fusing the counts with sparsely available travel times. Second, the proposed framework uses particle filtering and an innovative hierarchical resampling scheme, which effectively integrates over the remaining error distribution, resulting in plausible trajectories. The proposed data assimilation framework is tested and validated using simulated data. Experiments and an extensive sensitivity analysis show that the proposed method is robust to errors both in the model and in the measurements, and provides good estimations for vehicle accumulation and vehicle trajectories with moderate sensor quality. The framework does not impose restrictions on the type of microscopic models used and can be naturally extended to include and estimate additional trajectory attributes such as destination and path, given data are available for assimilation.     

Estimating traffic volumes for signalized intersections using connected vehicle data

Recently connected vehicle (CV) technology has received significant attention thanks to active pilot deployments supported by the US Department of Transportation (USDOT). At signalized intersections, CVs may serve as mobile sensors, providing opportunities of reducing dependencies on conventional vehicle detectors for signal operation. However, most of the existing studies mainly focus on scenarios that penetration rates of CVs reach certain level, e.g., 25%, which may not be feasible in the near future. How to utilize data from a small number of CVs to improve traffic signal operation remains an open question. In this work, we develop an approach to estimate traffic volume, a key input to many signal optimization algorithms, using GPS trajectory data from CV or navigation devices under low market penetration rates. To estimate traffic volumes, we model vehicle arrivals at signalized intersections as a time-dependent Poisson process, which can account for signal coordination. The estimation problem is formulated as a maximum likelihood problem given multiple observed trajectories from CVs approaching to the intersection. An expectation maximization (EM) procedure is derived to solve the estimation problem. Two case studies were conducted to validate our estimation algorithm. One uses the CV data from the Safety Pilot Model Deployment (SPMD) project, in which around 2800 CVs were deployed in the City of Ann Arbor, MI. The other uses vehicle trajectory data from users of a commercial navigation service in China. Mean absolute percentage error (MAPE) of the estimation is found to be 9–12%, based on benchmark data manually collected and data from loop detectors. Considering the existing scale of CV deployments, the proposed approach could be of significant help to traffic management agencies for evaluating and operating traffic signals, paving the way of using CVs for detector-free signal operation in the future.     

Modeling real-time human mobility based on mobile phone and transportation data fusion

Even though a variety of human mobility models have been recently developed, models that can capture real-time human mobility of urban populations in a sustainable and economical manner are still lacking. Here, we propose a novel human mobility model that combines the advantages of mobile phone signaling data (i.e., comprehensive penetration in a population) and urban transportation data (i.e., continuous collection and high accuracy). Using the proposed human mobility model, travel demands during each 1-h time window were estimated for the city of Shenzhen, China. Significantly, the estimated travel demands not only preserved the distribution of travel demands, but also captured real-time bursts of mobility fluxes during large crowding events. Finally, based on the proposed human mobility model, a predictive model is deployed to predict crowd gatherings that usually cause severe traffic jams.     

Sustainability and interactivity between cities and ports: a two-stage data envelopment analysis (DEA) approach

Ports and cities are intrinsically linked. Port city, which serves as a link between the local and global economy, is an integration of both urban and port systems. Constrained by different regional structures, port cities have developed various formulations over time. Using a two-stage data envelopment analysis (DEA) approach, this paper proposes a new method for measuring the sustainable development of different port city systems. While the previous empirical studies often separate the port system and the urban system, this paper assesses the two systems in an integrated way. Moreover, this paper develops a systematic methodology for measurement of sustainability. Twenty world-leading container port cities are selected for this study using contemporary data. The DEA results display their relative differences in levels of sustainable development, which reveal the effectiveness of the prevailing policies in them. Eventually, recommendations are drawn for other port cities by referring to the best practices.     

基于语义的可定制数据切分和动态加载方法

文章提供一种基于语义的可定制数据切分和动态加载方法，它能够对源数据库建立基于语义的元数据描述，根据不同用户的数据需求，依据数据的语义相关性，转化并归纳为通用的策略模版，基于策略进行数据的切割和数据的级联抽取。之后，采用容错式动态加载方法。这在一定程度上实现了异构数据库之间的批量数据迁移。     

Travel analytics: Understanding how destination choice and business clusters are connected based on social media data

Understanding how destination choice and business clusters are connected is of great importance for designing sustainable cities, fostering flourishing business clusters, and building livable communities. As sharing locations and activities on social media platforms becomes increasingly popular, such data can reveal destination choice and activity space which can shed light on human-environment relationships. To this end, this research models the relationship between characteristics of business clusters and check-in activities from Los Angeles County, California. Business clusters are analyzed via two lenses: the supply side (employment data by industry) and the demand side (on-line check-in data). Spatial and statistical analyses are performed to understand how land use and transportation network features affect the popularity of the identified clusters and their relationships. Our results suggest that a cluster with more employment opportunities and more types of employment is associated with more check-ins. A business cluster that has access to parks or recreational services is also more popular. A business cluster with a longer road network and better connectivity of roads is associated with more check-ins. The visualization of the common visitors between clusters reveals that there are a few clusters with outstanding strong ties, while most have modest ties with each other. Our findings have implications on the influence of urban design on the popularity of business clusters.     

基于小波和仿射不变矩特征融合的舰船型号识别

针对不变矩对仿射形变目标描述的不足,为提高舰船型号的识别精度,提出一种基于小波和仿射不变矩特征融合的舰船型号识别方法.首先对二值舰船图像进行归一化处理,并分别提取归一化舰船图像的小波矩特征值和仿射不变矩特征值;然后通过计算样本特征均值与标准差的比值,选择出鲁棒性好、稳定性高的特征,通过归一化方法进行融合;最后构造五类舰船的样本集,采用支持向量机(SVM)作为分类器识别测试样本的型号,分析不同矩特征、样本集大小、SVM参数、本文方法对识别精度、稳定性的影响.实验结果表明,文中给出的算法提高了识别精度,并且在训练样本集较小时仍能获得88%以上的识别率.